Instrument Panel (IP) - Trim Panel Replacement - Right
Instrument Panel Trim Panel Replacement - Right Side
Removal Procedure
1. Remove the screw from the lower edge of the RH lower trim plate.
2. Open the instrument panel compartment door.
3. Starting at the top of the instrument panel RH lower trim plate, pull the trim panel rearward to release the top retainer.
4. Pull the instrument panel RH lower trim plate in the middle rearward to release the middle retainer.
5. Pull the bottom of the Instrument panel RH lower trim plate straight out to release the final retainer.
6. Remove the instrument panel RH lower trim plate from the instrument panel.
Installation Procedure
1. Position the instrument panel RH lower trim plate retainers to the slots in the instrument panel.
2. Install the instrument panel RH lower trim plate starting at the bottom, press the panel straight in and working upward pressing in the retainers until fully seated.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the screw to the lower edge of the RH lower trim plate.
Tighten the lower RH trim plate screw to 2 Nm (18 lb in).
4. Close the instrument panel compartment door.