Solar Sensor: Service and Repair

HVAC SYSTEM - AUTOMATIC

SUN LOAD SENSOR REPLACEMENT





REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the instrument panel upper trim pad.
3. Disconnect the sunload temperature sensor and the daytime running lamp light sensor from the defroster grille.
4. Disconnect the electrical connector to the sun load temperature sensor.
5. Remove the sunload sensor.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the sun load sensor.
2. Install the sun load temperature sensor and the daytime running lamp light sensor to the defroster grille.
3. Install the instrument panel upper trim pad.
4. Connect the negative battery cable.