P/S Cooler Pipe/Hose Replacement

Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Place the drain pan under the vehicle.
3. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.





4. Remove the power steering return hoses from the power steering cooler pipe.
5. Remove the power steering cooler pipe from the retaining clips on the frame.
6. Remove the power steering cooler pipe from the vehicle.

Installation Procedure
1. Install the power steering cooler pipe to the retaining clips on the frame.





2. Install the power steering return hoses to the power steering cooler pipe.
3. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
4. Remove the drain pan from under the vehicle.
5. Lower the vehicle.
6. Fill the power steering fluid reservoir. Refer to Refilling the Power Steering System.
7. Bleed the power steering system. Refer to Bleeding the Power Steering System.
8. Inspect the power steering system for leaks.