Feature Customization - Changing the Automatic Door Lock/Unlock Mode

There are two ways to change the automatic door lock/unlock mode:
^ The Tech 2 scan tool method Complete the following steps in order to change the automatic door lock/unlock mode using the Tech 2 scan tool method:
^ At the SELECT SYSTEM screen select BODY.
^ Then select the car line and nameplate.
^ At the APPLICATION MENU screen select PERSONALIZATION.
^ At the next APPLICATION MENU screen select SET OPTIONS.
^ At the next APPLICATION MENU screen select the mode you want.
^ The door lock switch method.

Complete the following steps in order to change the automatic door lock/unlock mode using the door lock switch method:
1. Close all of the vehicle doors.
2. Turn the ignition switch to the RUN position.
3. Firmly depress and hold the brake pedal.
4. Press and hold LOCK on either door lock switch.
5. Hold LOCK on the door lock switch and complete the following steps:
^ Shift the transaxle out of PARK.
^ Shift the transaxle back into PARK.
6. Complete the following steps in order to advance the mode:
^ Shift the transaxle out of PARK.
^ Shift the transaxle back into PARK.
7. The BCM sounds the chime a number of times equal to the automatic door lock/unlock mode. A transition past mode 4 repeats the sequence starting with mode 1.
Release the door lock when you obtain the desired mode. Releasing the door lock will exit and save the current customization mode.

Mode 3 is set when the vehicle is manufactured. Disconnecting the battery for up to a year will not change the mode.