LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2000 >> Regal V6-3.8L VIN K >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Repair Instructions >> 94. Case Cover Bearing Assemble

94. Case Cover Bearing Assemble

^ Tools Required
- J 8092 Driver Handle
- J 41991 Bearing Remover/Installer Driveshaft Bearing Remover/installer





1. Assemble J 8092 and J 41991 Bearing Remover/Installer for bearing installation.
2. Place the case cover (400) on a clean, flat surface with the case mating surface up.
3. Use a hammer and J 8092 / J 41991 Bearing Remover/Installer. Install the drive shaft bearing (431) with the bearing identification facing up. Drive the drive shaft bearing (431) into the case cover (400) until J 41991 Bearing Remover/Installer stops against the case cover(400).
scientia non olet · About LEMON Manuals