Power Window Switch Replacement

CAUTION: Disconnect the power window switch when working inside the driver's door. When operated, the Express Down Feature allows the door window to drop very quickly, without stopping, which could cause personal iniury.

IMPORTANT
^ When removing a door trim panel or switch plate, the ignition switch must be in the OFF position. This will eliminate the possibility of shorting out the switch if a flat-bladed tool, awl or metal object is used to remove the switch from the harness.
^ Use protective coating/tape at the point of insertion of the flat surface tool. Damage to the inner door panel may occur.




1. Use a flat bladed tool in order to remove the power window and door lock switch plate assembly from the trim panel.
Insert the tool at the rear of the switch plate. Press forward in order to release the switch plate retainers.
2. Disconnect the electrical connectors.




3. Remove the switches from the mounting plate.

INSTALLATION PROCEDURE




1. Install the switches to the mounting plate.




2. Connect the electrical connectors.
3. Press the switch and mounting plate into the trim panel.