Rear Side Door Window Replacement

Rear Side Door Window Replacement

Removal Procedure

1. Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement Service and Repair
2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement (Service and Repair).
3. Remove the inner energy absorber. Refer to Rear Door Energy Absorber Pad Replacement.
4. Remove the inner sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement (Rear Side Door Window Inner Sealing Strip Replacement).
5. Remove the outer belt sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement (Rear Side Door Window Outer Sealing Strip Replacement).
6. Remove the rear door frame molding. Refer to Rear Door Opening Frame Garnish Molding Replacement ().




7. Remove the window mounting bolts (1, 2).
8. Remove the window.

Installation Procedure




1. Position the window between the inner and the outer panels.
2. Point the lower front corner of the window down.
3. Pass the window through the belt opening.
Align the edges with the door window weatherstrip.
4. Turn the window to the horizontal position.
Align the holes in the window with the holes in the regulator. Ensure that both sealing lips on the front door outer belt sealing strip are not rolled over and pointing downward. If this condition is present, the window will not raise properly.

Notice: Refer to Fastener Notice in Cautions and Notices.

5. Install the window to regulator bolts (1, 2). Tighten the forward bolt first.

Tighten the forward window to regulator bolt to 10 Nm (89 lb in).

6. Tighten the rearward bolt second.

Tighten the rearward window to regulator bolt to 10 Nm (89 lb in).

7. Install the rear door frame molding. Refer to Rear Door Opening Frame Garnish Molding Replacement ().
8. Install the outer belt sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement (Rear Side Door Window Outer Sealing Strip Replacement).
9. Install the inner sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement (Rear Side Door Window Inner Sealing Strip Replacement).
10. Install the inner energy absorber. Refer to Rear Door Energy Absorber Pad Replacement.
11. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement (Service and Repair).
12. Install the trim panel. Refer to Rear Side Door Trim Panel Replacement Service and Repair