Scan Tool Data Definitions - Dash Integration Module (DIM)

Battery Voltage: The scan tool displays 0-20 Volts. The voltage as received on the battery positive voltage circuit of the Module.

Daytime Running Lamp: The scan tool displays On/Off. The commanded state of the daytime running lamp relay.

Flash to Pass Switch: The scan tool displays On/Off. The state of the flash to pass switch.

Head Lamp Switch: The scan tool displays On/Off. The state of the flash to pass switch signal. On indicates the flash to pass headlamps are requested on.

High Beam Output (Flash): The scan tool displays On/Off. The commanded state of the high beam relay.

Incandescent Dim #1: The scan tool displays On/Off. The state of the incandescent lamp ground circuit.

Lights On with Wipers: The scan tool displays On/Off. The state of the wiper/washer system.

Low Beam Output: The scan tool displays On/Off. The commanded state of the low beam relay.

Park Lamp: The scan tool displays On/Off. The state of the park lamp switch.

Park Lamp Relay Output: The scan tool displays On/Off. The commanded state of the park lamp relay.