Power Windows - Inoperative - All
TEST DESCRIPTIONSteps 1-9:
Steps 10-15:
The Number(s) Below refer to the step number(s) on the diagnostic table.
2. Determines if this is the correct chart for the symptom.
4. The door modules C2 connectors and the retained accessory power (RAP) relay share this same battery positive voltage circuit. Disconnecting the RAP relay in this step will isolate the battery positive voltage circuit to the door modules C2 connectors, and eliminate the possibility of a RAP function causing the test lamp to illuminate, which could result in a possible false diagnosis of the circuit.
6. This step isolates which module or associated battery positive voltage circuit (connectors C2) is shorted to ground.