Parking Assist Control Module: Service and Repair
REAR OBJECT DETECTION MODULE REPLACEMENTREMOVAL PROCEDURE
1. Remove the rear compartment trim.
2. Remove the fasteners (2) securing the rear park assist module (1).
3. Disconnect the electrical connector (3).
INSTALLATION PROCEDURE
1. Reconnect the electrical connector (3).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the fasteners (2) securing the rear park assist module (1).
Tighten
Tighten the fasteners to 9 N.m (80 lb in).
3. Install the rear compartment trim.