Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring

- Tools Required
- J 23653-SIR Steering Column Lock Plate

Removal Procedure

Caution: Refer to SIR Caution in Service Precautions.





1. Disable the SIR system. Refer to Disabling the SIR System in Restraint Systems.
2. Remove the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement in Restraint Systems.
3. Install J 23653-SM to the upper steering shaft.
4. Using J 23653-SIR depress the lock plate and remove the retaining clip.
5. Remove J 23653-SIR from the upper steering shaft.
6. Remove the shaft lock shield assembly (1).
7. Remove the turn signal cancel cam assembly (2).
8. Remove the upper bearing spring (3).

Installation Procedure





1. Install the upper bearing spring (3).
2. Install the turn signal cancel cam assembly (2).
3. Install the shaft lock shield assembly (1).
4. Install a new bearing retainer.
5. Install J 23653-SIR to the steering column.
6. Using J 23653-SIR depress the lock plate.
7. Push the bearing retainer into place.
8. Remove the J 23653-SIR from the steering column.
9. Install the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement in Restraint Systems.
10. Enable the SIR system. Refer to Enabling the SIR System in Restraint Systems.