Cruise Control Servo Cable: Service and Repair

REMOVAL PROCEDURE




1. Remove the fuel injector site shield. Refer to Fuel Injector Sight Shield Replacement (L36) or Fuel Injector Sight Shield Replacement (L67) in Engine.
2. Disconnect the cruise control cable at the TBI cam and the throttle body bracket.
3. Disconnect the cruise control cable from the cruise control module.

IMPORTANT: Note the cable routing for replacement.




4. Remove the cable from the retainers (1).

INSTALLATION PROCEDURE




1. Connect the cruise control cable to the cruise control module.
2. Install the cruise control cable slug TBI cam. Ensure that the cable is under the hook.
3. Snap the cable to the throttle body bracket.




4. Install the cable to the retainers (1).
5. Adjust the cable.
6. Install the fuel injector site shield. Refer to Fuel Injector Sight Shield Replacement (L36) or Fuel Injector Sight Shield Replacement (L67) in Engine.

For a description of the RPO Code(s) shown in this article or of the images therein, refer to the RPO Code List found at Vehicle/Application ID. RPO Codes