Rear Wheel Alignment

Important: Complete the left and right rear toe adjustments separately, per wheel. Using the following procedure.

1. Loosen the inner adjustment link cam nut (2).

Notice: Refer to Fastener Notice in Service Precautions.

2. In order to adjust the toe, rotate the cam bolt.
- Tighten the cam nut to 75 Nm (55 ft. lbs.).
3. Tighten the tie rod nut.
- Tighten the tie rod nut to 64 Nm (47 ft. lbs.).
4. Recheck the toe setting after tightening.
5. Readjust the toe setting if necessary. Refer to Wheel Alignment Specifications.