Trunk / Liftgate Lock Cylinder: Service and Repair

Rear Compartment Lid Lock Cylinder Replacement

Removal Procedure

1. Open the rear compartment.




2. Pull the retainer from the rear compartment lock cylinder. Remove the retainer.
3. Disconnect the rear compartment lock cylinder actuator cable from the rear compartment lock cylinder.
4. Remove the rear compartment lock cylinder and the gasket from the rear compartment lid.



Installation Procedure

1. Install the rear compartment lock cylinder and the gasket to the rear compartment lid.




2. Install the retainer by pressing the retainer to the rear compartment lock cylinder.
3. Connect the rear compartment lock cylinder actuator cable to the rear compartment lock cylinder.
4. Close the rear compartment.