Rear Seat Back Cover Replacement

Rear Seat Back Cover Replacement

Removal Procedure

1. Remove the rear seat back. Refer to Rear Seat Back Replacement (Non Folding) (Rear Seat Back Replacement (Non Folding))Rear Seat Back Replacement (Folding) (Rear Seat Back Replacement (Folding)) .
2. Remove the rear seat armrest, if equipped. Refer toRear Seat Armrest Replacement (Rear Seat Armrest Replacement) .




3. Remove the hog rings from the rear seat back cover.




4. Reach inside of the rear seat back cover in order to unfasten the hook and the loop retainers securing the rear seat back cover to the pad.




5. Remove the rear seat back cover from the pad.



Installation Procedure





1. Position the rear seat back cover to the pad.




2. Align the alignment marks on the rear seat back cover to the alignment marks on the pad.




3. Pull the rear seat back cover over the pad. Align the hook and the loop retainers.




4. Pull the rear seat back cover over the pad and pull over and under the edge.




5. Use firm hand pressure in order to fasten the hook and the loop retainers, securing the rear seat back cover to the pad.




6. Align the alignment marks on the rear seat back cover to the alignment marks on the pad, on the back side.




7. Install the hog rings to the rear seat back cover.
8. Install the rear seat armrest, if equipped. Refer toRear Seat Armrest Replacement (Rear Seat Armrest Replacement) .
9. Install the rear seat back. Refer to Rear Seat Back Replacement (Non Folding) (Rear Seat Back Replacement (Non Folding))Rear Seat Back Replacement (Folding) (Rear Seat Back Replacement (Folding)) .