Rear Seat Back Replacement (Folding)

Rear Seat Back Replacement (Folding)

Removal Procedure





1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement) .
2. Remove the nuts from the rear seat retainer at the bottom of the rear seat back.




3. Fold the rear seat back cushions down.
4. Remove the bolts from the rear seat latches.
5. Remove the rear seat latches from the rear seat back.
6. Fold the rear seat back cushions up.
7. Reposition the seat belts from the rear seat back.
8. Remove the rear seat back from the vehicle.



Installation Procedure





1. Position the rear seat back to the vehicle.
2. Reposition the seat belts to the rear seat back.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the nuts to the rear seat retainer at the bottom of the rear seat back.

Tighten the nuts to the rear seat retainer to 10 N.m (89 lb in).





4. Fold the rear seat back cushions down.
5. Install the rear seat latches to the rear seat back.
6. Install the bolts to the rear seat latches.

Tighten the rear seat back latch bolts to 6 N.m (53 lb in).

7. Fold the rear seat back cushions up.
8. Inspect the rear seat for proper operation.
9. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement) .