Rear Split Folding Seat Back Bolster Replacement

Rear Split Folding Seat Back Bolster Replacement

Removal Procedure

1. Remove the rear seat back. Refer to Rear Seat Back Replacement (Non Folding) (Rear Seat Back Replacement (Non Folding))Rear Seat Back Replacement (Folding) (Rear Seat Back Replacement (Folding)) .




2. Pull back the trim on the right rear seat bolster in order to expose the rear compartment release handle cable, if equipped.
3. Reposition the rear compartment release handle cable from the right rear seat bolster, if equipped.




4. Pull back the rear seat bolster trim to expose the bolts to the rear seat frame.
5. Remove the bolts from the left and/or right rear seat bolster.
6. Remove the left and/or right rear seat bolster from the rear seat back frame.




7. Remove the push-in retainers from the center of the rear seat bolsters.




8. Remove the push-in tab from the end of the rear seat bolsters.




9. Remove the push-in J-hook retainers from the rear seat bolsters.




10. Remove the rear seat bolsters trim cover from the rear seat bolsters pads.



Installation Procedure





1. Install the rear seat bolster trim cover to the rear seat bolster pads.




2. Install the push-in retainers to the center of the rear seat bolsters, pressing into place until fully seated.




3. Reposition the rear seat bolsters trim cover side flap under and over the seat back frame side rail.
Reposition the rear compartment release handle cable to the right rear seat bolster, if equipped.

Notice: Refer to Fastener Notice in Cautions and Notices.





4. Install the bolts to the left and/or right rear seat bolster.

Tighten the bolts to 6 N.m (53 lb in).





5. Install the push-in tab from the end of the rear seat bolsters, pressing into place until fully seated.




6. Install the push-in J-hook retainers to the rear seat bolsters, pressing into place until fully seated.
7. Install the rear seat back. Refer to Rear Seat Back Replacement (Non Folding) (Rear Seat Back Replacement (Non Folding))Rear Seat Back Replacement (Folding) (Rear Seat Back Replacement (Folding)) .