General Information

The purpose of the heater is to supply heat to the interior of the vehicle. The vehicle operator can determine the level of heat by toggling the left air temperature switch, located on the HVAC control module, to any setting. The temperature switch can change the vehicle's air temperature regardless of the HVAC mode setting, heater or A/C. The vehicle passenger can adjust their temperature by pressing the right air temperature switches. Passenger temperatures can be offset 3°C (6°F) cooler or warmer than the primary setting.

The HVAC control module receives power from the fuse block on the ignition 3 voltage circuit along with the battery positive circuit. The module is grounded by the ground circuit. The HVAC control module communicates directly to the Powertrain Control Module (PCM) on the HVAC class 2 serial data circuit, through a splice pack, and through the ECM/PCM/VCM class 2 serial data circuit.