Compressor Clutch Does Not Engage
TEST DESCRIPTIONSteps 1-5:
Steps 6-16:
Steps 17-31:
Steps 32-35:
The numbers below refer to the step numbers on the diagnostic table.
2. Placing the mode switch in any position other than OFF, along with placing the air temperature control switch in a cold setting, activates A/C operation. For the purpose of this and future steps where A/C operation is necessary bi-level mode is used for consistent testing.
5. The HVAC control module is inoperative when the module does not respond to any operator control requests to enable the A/C compressor. The blower motor may still operate independent of the A/C controls.