Secondary Air Injection (AIR) Shut-Off Valve Replacement

REMOVAL PROCEDURE




1. Reposition the pinch clamp (1) from the valve end of the hose.
2. Disconnect the vacuum line from the valve.




3. Remove the AIR pipe bolts (3).
4. Remove the bolt (2) that secures the valve (1) to the bracket (5).
5. Remove the valve and pipe assembly (1) from the vehicle.

INSTALLATION PROCEDURE




1. Install the valve and pipe assembly to the AIR hose.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the bolt (2) that retains the valve (1) to the bracket (5).

Tighten
Tighten the mounting bolt to 9 N.m (80 lb in).

3. Install the AIR pipe bolts.

Tighten
Tighten the mounting bolts to 9 N.m (80 lb in).




4. Install the pinch clamp (1) back into position.
5. Connect the vacuum line to the combination valve.