Rear Seat Armrest Replacement

Rear Seat Armrest Replacement

Removal Procedure





1. Fold down the rear seat back.
2. Unhook the J-hook retainers at the bottom of the rear seat back.




3. Pull back the carpet in order to expose the rear seat armrest nuts.
4. Remove the nuts from the rear seat armrest.




5. Reposition the rear seat to the upright position.
6. Remove the rear seat armrest from the rear seat back.



Installation Procedure





1. Position the rear seat armrest to the rear seat back retainer slot.




2. Install the rear seat armrest, pressing into place until the armrest studs are fully seated through the seat back.
3. Fold down the rear seat back.

Notice: Refer to Fastener Notice in Cautions and Notices.





4. Install the rear seat armrest nuts.

Tighten the rear seat armrest nuts to 3 N.m (27 lb in).





5. Pull back the carpet and refasten the J-hook retainers.
6. Reposition the rear seat to the upright position.