Cornering Lamp: Description and Operation

The front cornering lamps are located outboard of the low-beam headlamp bulb in each of the headlamp assemblies. The cornering lamps operate when a turn is initiated using the turn signal/multifunction lever. The cornering lamps will operate only with the ignition switch in the RUN position and will not operate during hazard flasher operation.

The TURN SIGNAL CORN LPS fuse supplies voltage to the turn signal switch when the ignition is in RUN. When the turn signal switch is placed in the LH or RH position the corresponding cornering lamp will receive voltage and illuminate. The cornering lamps are permanently grounded.