Disabling

IMPORTANT: Refer to SIR Service Precautions.




1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn OFF the ignition.
3. Remove the key from the ignition switch.
4. Remove the IP fuse block access door.

IMPORTANT: With the AIR BAG Fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation, and does not indicate an SIR system malfunction.

5. Remove the AIR BAG Fuse.




6. Remove the LH insulator panel.
7. Remove the Connector Position Assurance (CPA) from the inflatable restraint steering wheel module coil connector located at the base of the steering column.
8. Disconnect the steering wheel module coil connector.




9. Remove the CPA from the inflatable restraint IP module connector located to the right of the steering column.
10. Disconnect the IP module connector.

Preliminary, Early Release Information:

11. Remove the CPA from the inflatable restraint side impact module - LF connector (4) located under the driver seat.
12. Disconnect the side impact module - LF connector (4).