Procedures

DRAINING PROCEDURE

CAUTION: Do not drain the fuel into an open container. Never store the fuel in an open container due to the possibility of a fire or an explosion.

NOTE: Do not drain fuel through the fuel tank filler pipe in order to prevent damage to the fuel tank filler pipe check-ball.

1. Relieve the fuel system fuel pressure. Refer to Fuel Pressure Relief Procedure.
2. Remove the fuel sender assembly.
3. Use a hand operated fuel pump device in order to drain the fuel through the fuel sender access panel.
4. Install the fuel sender assembly.
5. Remove the fuel till cap.
6. Add fuel and install the fuel tank filler pipe cap.
7. Connect the negative battery cable.
8. Inspect for leaks.
8.1. Turn ON the ignition for 2 seconds.
8.2. Turn OFF the ignition for 10 seconds.
8.3. Turn ON the ignition.
8.4. Inspect for fuel leaks.
9. Install the fuel injection sight shield.