Tilt Spring - Assemble

1. Lubricate the spring guide with synthetic grease.
2. Install the spring guide into the tilt spring.





Caution: Refer to Tilt Spring Caution in Service Precautions.

3. Install the tilt spring (1) onto the steering column support assembly (2) and onto the steering column tilt head assembly by using the following procedure:
3.1. Install the tilt spring (1) onto the steering column tilt head assembly.
3.2. Install the tilt spring (1) onto the post on the steering column support assembly (2).
4. Remove the tilt knob.
5. Install the upper and lower trim covers. Refer to Steering Column Trim Covers - Assemble - Off Vehicle (Column Shift) or Steering Column Trim Covers - Assemble - Off Vehicle (Floor Shift).