Rearview Mirror Replacement

Rearview Mirror Replacement

Removal Procedure





1. Remove the wire harness cover from the lighted rearview mirror, if equipped.




2. Remove the screw from the base.
3. Slide mirror off of the support.
4. Disconnect the electrical connector from the lighted rearview mirror, if equipped.



Installation Procedure

1. Connect the electrical connector to the lighted rearview mirror, if equipped.




2. Slide the mirror onto the mirror support.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the screw to the base.

Tighten the mirror screws to 2 N.m (18 lb in).





4. Install the wire harness cover from the lighted rearview mirror, if equipped.