Drum Brake Adjusting Hardware Replacement
DRUM BRAKE ADJUSTING HARDWARE REPLACEMENTTools Required
J 34800 Brake Shoe Spanner and Spring Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the rear tire and wheel assembly.
3. Remove the brake drum.
4. Remove the adjuster spring (3).
5. Remove the adjuster actuator lever (1).
Installation Procedure
1. Install the adjuster actuator lever (1).
2. Install the adjuster spring (3).
3. Adjust the drum brakes.
4. Install the brake drum.
5. Install the rear tire and wheel assembly.
6. Lower the vehicle.