Power Steering Return Hose Replacement
Power Steering Return Hose ReplacementRemoval Procedure
1. Place a drain pan under the vehicle in order to catch any draining power steering fluid.
2. Remove the coolant reservoir.
3. Remove the return hose from the power steering pump.
4. Remove the return hose from the retaining bracket on the engine.
5. Remove the return hose from the cooler pipe/hose.
6. Remove the return hose from the vehicle.
Installation Procedure
1. Install the power steering return hose to the cooler pipe/hose.
2. Install the return hose to the retaining bracket on the engine.
3. Install the return hose to the power steering pump.
4. Install the coolant reservoir.
5. Fill the power steering system.
6. Bleed the power steering system.
7. Inspect the power steering system for leaks.
8. Remove the drain pan from under the vehicle.