Catalyst Shield: Service and Repair

Catalytic Converter Heat Shield Replacement

Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.

Notice: Refer to Catalytic Converter Movement Notice in Service Precautions.





2. Suitably support the exhaust system.
3. Remove the catalytic converter.





4. Remove the oxygen sensor wiring harness (3) from the catalytic converter heat shield.





5. Remove the catalytic converter heat shield pop rivets.
6. Remove the catalytic converter heat shield.

Installation Procedure





1. Install the catalytic converter heat shield.
2. Install the converter heat shield pop rivets.





3. Install the oxygen sensor wiring harness (3) to the catalytic converter heat shield.





4. Install the catalytic converter.
5. Remove the support from the exhaust system.
6. Inspect the exhaust system for leaks and underbody contact.
7. Lower the vehicle.