Accelerator Controls Cable Bracket Replacement

REMOVAL PROCEDURE




1. Remove the air cleaner intake duct.
2. Remove the cruise control cable from the throttle body lever.
3. Remove the cruise control cable from the accelerator bracket.




4. Remove the accelerator cable from cruise control throttle body lever.
5. Remove the accelerator cable from accelerator cable bracket.




6. Remove the nut and the bolts from the accelerator cable bracket.
7. Remove the accelerator cable bracket.

INSTALLATION PROCEDURE




1. Install the accelerator cable bracket to the throttle body.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the nut and the bolts to the accelerator cable bracket.

Tighten
^ Tighten the nut to 10 N.m (89 lb in).
^ Tighten the bolts to 13 N.m (115 lb in).




3. Install the accelerator cable to the accelerator cable bracket.
4. Install the accelerator cable into throttle body lever.




5. Install the cruise control cable to the throttle body lever.
6. Install the cruise control cable to the accelerator cable bracket.

IMPORTANT: Inspect for complete throttle opening and closing positions by operating the accelerator pedal.

7. Install the air cleaner intake duct.