Bracket Replacement - Child Seat Belt Restraint System

REMOVAL PROCEDURE




1. Remove the rear seat back.
2. Remove the rear center seat belts.
3. Remove the bracket nut (1) located between the center seat belts.
4. Remove the bolts (2) from each end of the bracket.
5. Remove the bracket from the vehicle.

INSTALLATION PROCEDURE




1. Position the bracket in the vehicle.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Apply a thread sealant, GM P/N USA 12345382 Canada 10953489, Loctite 242, Permatex 24200 to the threads of the bolts (2) and also the stud for the bracket nut (1).
3. Install the bolts (2) to each end of the bracket.

Tighten
Tighten the child seat latch bracket bolts to 42 N.m (31 lb ft).

4. Install the bracket nut (1) between the center seat belts.

Tighten
Tighten the child seat latch bracket nut to 42 N.m (31 lb ft).

5. Install the rear center seat belts.
6. Install the rear seat back.