Power Accessory Port Replace - Front Floor Console (D06)
TOOLS REQUIREDJ 42059 Cigarette Lighter Socket Remover
REMOVAL PROCEDURE
1. Remove the accessory power receptacle fuse.
2. Remove the accessory power receptacle by placing one side of the "T" portion of the J 42059 into the receptacle opening. Angle the other side into the opposite opening. Pull the accessory power receptacle straight out.
3. Remove the J 42059.
4. Disconnect the electrical connector from the front floor console accessory power receptacle.
5. Remove the accessory power receptacle retainer.
INSTALLATION PROCEDURE
1. Align the accessory power receptacle retainer to the slot in the console opening.
2. Install the retainer by pressing into place until fully seated.
3. Connect the electrical connector to the front floor console accessory power receptacle
4. Install the accessory power receptacle to the front floor console. Press into place until fully seated.
5. Install the accessory power receptacle fuse.
6. Inspect the accessory power receptacle for proper operation.
"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes