Cowl Moulding / Trim: Service and Repair
Air Inlet Grille Panel ReplacementRemoval Procedure
1. Remove the windshield wiper arms.
2. Remove the push-in retainer caps from the air inlet grille panel.
3. Remove the push-in retainers from the air inlet grille panel.
4. Remove the windshield washer hose.
5. Using needle nose pliers, push the washer hose fitting into the plenum area.
6. Lift the right side of the air inlet grille panel over the wiper arm drive spindles, and remove the panel from the vehicle.
Installation Procedure
1. Install the windshield washer hose fitting into the air inlet grill panel.
2. Install the air inlet grille panel to the vehicle.
3. Install the washer hose.
4. Install the air inlet grille panel push-pin retainers.
5. Install the caps onto the push-pin retainers.
6. Install the windshield wiper arms.