Hood: Adjustments
Hood AdjustmentFore and Aft Adjustment
1. Loosen the lower hood hinge fasteners (1). Oversized holes allow fore and aft adjustment of the hood.
Notice: Refer to Fastener Notice in Service Precautions.
2. Tighten the lower hood hinge fasteners (1).
Tighten the fasteners to 24 N.m (18 lb ft).
Up and Down Adjustment
1. Loosen the adjustment link fastener (2) on the lower hinge (1).
2. Adjust the hood as necessary.
Notice: Refer to Fastener Notice in Service Precautions.
3. Tighten the adjustment link fastener (2).
Tighten the fastener to 24 N.m (18 lb ft).
4. Adjust the front hood bumpers (1) so that the hood is flush with the fenders by twisting the bumpers (1) in or out.
5. Adjust the hood latch. Refer to Hood Latch Adjustment.
6. After the hood adjustment is performed, sufficient load must remain on the front and rear hood bumpers to eliminate hood flutter. This can be achieved by lowering the hood latch an additional 3 mm (1/8 in), for front flutter, and raising the rear bumper (2) for rear flutter.