Trunk / Liftgate Latch: Service and Repair

Latch Replacement - Rear Compartment Lid

Removal Procedure




1. Disconnect the electrical connectors from the rear compartment lid latch assembly.
2. Remove the latch cable (2) from the lock cylinder.
3. Remove the fastener (3) securing the rear compartment lid interior release handle to the rear compartment lid.
4. Remove the fasteners securing the rear compartment lid latch assembly (1) to the rear compartment lid.
5. Remove the lid latch assembly.

Installation Procedure




1. Install the lid latch assembly (1).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the fasteners in order to secure the lid latch assembly (1).

Tighten the fasteners to 9 N.m (80 lb in).

3. Install the latch cable (2) to the lock cylinder.
4. Install the fastener (3) in order to secure the rear compartment lid interior release handle to the rear compartment lid.

Tighten the fastener (2) to 2 N.m (18 lb in).

5. Connect the electrical connectors to the lid latch assembly.