Console Replacement

Console Replacement

Removal Procedure




1. Move the front seats to the full forward position.
2. Remove the two rear side bolts (3,4)..
3. Move the front seats to the rear most position.
4. Remove the two front side bolts (2,5).
5. Carefully lift the console assembly (1).
6. Disconnect the electrical connector (6).
7. Carefully, as not to damage the front seats, remove the console assembly (1) from the vehicle.

Installation Procedure




1. Carefully, as not to damage the front seats, position the console (1) in the vehicle.
2. Connect the electrical connector (6).
3. Align the console assembly (1) to the floor mounting holes.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the front two bolts (2,5).

Tighten the bolts to 2 N.m (18 lb in).

5. Move the front seats to the full forward position.

Notice: Refer to Fastener Notice in Service Precautions.

6. Install the rear two bolts (3,4).

Tighten the bolts to 2 N.m (18 lb in).