Instrument Panel (IP) - Trim Panel Replacement - Center

Trim Panel Replacement - IP Center

Removal Procedure




1. Remove the right accessory trim plate.
2. Remove the right insulator/closeout panel.
3. Remove the fasteners.
4. Remove the center trim panel (1) from the IP.

Installation Procedure




1. Install the center trim panel (1) to the IP.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the fasteners.

Tighten the fasteners to 2 N.m (18 lb in).

3. Install the right insulator/closeout panel.
4. Install the right accessory trim plate.