Instrument Panel Compartment - Replacement

Compartment Replacement - IP

Removal Procedure

1. Remove the right accessory trim plate.




2. Remove the IP center trim panel (1).
3. Remove the knee bolster.
4. Remove the IP compartment bin (3) from above the ashtray (2) by pulling the assembly rearward in order to disengage the clips from the IP.

Installation Procedure




1. Install the IP compartment bin assembly (3) above the ashtray (2) by aligning the tabs and pushing the assembly back into the IP in order to engage the clips.
2. Install the IP center trim panel (1).
3. Install the right accessory trim plate.
4. Install the knee bolster.