Radiator Support: Service and Repair

Tie Bar Replacement - Upper Removal Procedure




1. Remove the headlamp/fascia panel support bracket fasteners (1).
2. Remove the headlamp/fascia panel support brackets (5).
3. Remove the Radiator Support Brackets (4).
4. Remove the Air Cleaner Assembly.
5. Remove the upper tie bar fasteners (2).
6. Remove the upper tie bar (3) from the vehicle.

Installation Procedure




1. Install the upper tie bar (3) onto the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the upper tie bar fasteners (2).

Tighten the upper tie bar fasteners to 10 N.m (89 lb in).

3. Install the Air Cleaner Assembly.
4. Install the Radiator Support Brackets (4).
5. Install the headlamp/fascia panel support brackets (5).
6. Install the headlamp/fascia panel support bracket fasteners (1).

Tighten the headlamp/fascia panel support bracket fasteners to 9 N.m (80 lb in).