Cruise Control Module: Service and Repair

REMOVAL PROCEDURE




1. Disconnect the cruise control cable.
2. Disconnect the electrical connector (2).




3. Remove the cruise control module bracket retaining fasteners (1, 3).
4. Remove the cruise control module and bracket assembly (2) from the vehicle.
5. Remove the module to bracket fasteners.
6. Remove the cruise control module from the bracket.

INSTALLATION PROCEDURE




1. Install the cruise control module (2) to the bracket.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the module to bracket fasteners.

Tighten
Tighten the fasteners to 7.5 N.m (66 lb in).

3. Install the cruise control module and bracket assembly to the vehicle.
4. Install the module retaining fasteners (1, 3).

Tighten
Tighten the fasteners to 9 N.m (80 lb in).




5. Connect the electrical connector (2).

IMPORTANT: The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts the cable. Refer to Cruise Control Description and Operation for the complete operational details.

6. Connect the cruise control cable.
7. Inspect the component operation.