12. Exhaust Manifold Removal - Right with RPO NC8

Exhaust Manifold Removal - Right (with NC8)





1. Remove the EGR inlet pipe from the exhaust manifold.
2. Remove the EGR mounting bracket bolts.
3. Remove the EGR mounting bracket.





4. Remove air injection pipe assembly nuts.
5. Remove air injection pipe.





6. Remove the heated oxygen sensor lead.
7. Remove the heated oxygen sensor.





8. Remove vacuum solenoid bolt.
9. Remove vacuum solenoid and lines.





10. Remove Air Injection check valve bolts (1, 2).
11. Remove air injection check valve.





12. Remove the fuel injector sight shield mounting bracket nuts.
13. Remove the fuel injector sight shield mounting bracket.





14. Remove the right engine lift nut and bolt.
15. Remove the right engine lift hook bracket.





16. Remove the upper right exhaust manifold heat shield.





17. Remove the lower right exhaust manifold heat shield.
18. Remove the right side spark plugs.





19. Remove the exhaust manifold studs.
20. Remove the exhaust manifold.
21. Remove the exhaust manifold gasket.





22. Remove the exhaust manifold studs.