Antenna Control Module: Service and Repair
ANTENNA MODULE REPLACEMENTREMOVAL PROCEDURE
1. Lower the rear of the headliner far enough to access the antenna module.
2. Disconnect the electrical connectors from the radio antenna module.
3. Remove the fastener securing the radio antenna module to the roof beam.
4. Remove the radio antenna module.
INSTALLATION PROCEDURE
1. Install the radio antenna module to the roof beam, ensuring that the alignment tab is properly located.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the antenna module fastener.
Tighten
Tighten the fastener to 9 N.m (80 lb in).
3. Connect the electrical connectors to the radio antenna module.
4. Install the headliner.