Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2002 >> LeSabre V6-3.8L VIN K >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Service and Repair >> Rear Integration Module Replacement

Rear Integration Module Replacement

REMOVAL PROCEDURE




1. Before replacing the RIM, record the personalization settings to transfer to the new module (if they are available). Refer to Body Control Module (BCM) Programming/RPO Configuration (DIM) or Body Control Module (BCM) Programming/RPO Configuration (IPM) or Body Control Module (BCM) Programming/RPO Configuration (RIM)
2. Remove the rear seat cushion.
3. Remove the rear seat back.
4. Move the rear seat back insulator aside.
5. Remove the push pin retainers (1).
6. Disconnect the rear integration module (RIM) electrical connectors (3).
7. Remove the RIM (2).

INSTALLATION PROCEDURE




1. Install the RIM (2).
2. Connect the RIM electrical connectors (3).
3. Install the RIM (2) with the push pin retainers (1).
4. Reposition the rear seat back insulator.
5. Install the rear seat back.
6. Install the rear seat cushion.
7. Reprogram the RIM. Refer to Body Control Module (BCM) Programming/RPO Configuration (DIM) or Body Control Module (BCM) Programming/RPO Configuration (IPM) or Body Control Module (BCM) Programming/RPO Configuration (RIM). Programming and Relearning
pro multis · About Operation CHARM