Side Impact Module Wiring Harness Replacement
REMOVAL PROCEDURECAUTION: Refer to SIR Inflator Module Handling And Storage Caution in Service Precautions.
1. Disable the SIR system. Refer to Air Bag(s) Arming and Disarming.
2. Removal of passenger or driver inflatable restraint side impact inflator module wiring harness uses the same procedure.
3. Remove the inflatable restraint side impact inflator module (2) from seat (1).
4. With seat back cover (3) in the open position the inflatable restraint side impact inflator module wiring harness (4) will be expose.
5. Remove the retaining clips that secure the side impact inflator module wiring harness (4) to seat (1).
INSTALLATION PROCEDURE
1. Install the new side impact inflator module wiring harness (4) to seat (1).
2. Install the retaining clips that secure the side inflator module wiring harness (4) to seat (1).
3. Install the inflatable restraint side impact inflator module (2) to seat (1).
4. Enable the SIR system. Refer to Air Bag(s) Arming and Disarming.