Tilt Head Housing - Assemble
Steering Column Tilt Head Housing -Assemble - Off VehicleTools Required
^ J23653-SIR Steering Column Lock Plate Compressor
^ J42137 Steering Column Lock Plate Compressor Adapter
1. Install the inner race (4).
2. Install the upper bearing inner race seat (3).
3. Install the upper bearing spring (2).
4. Lubricate the turn signal cancel cam assembly (1) with lithium grease.
5. Install the turn signal cancel cam assembly (1).
6. Install the shaft lock shield assembly.
7. Install the new bearing retainer using J23653-SIR and J42137.
8. Remove J23653-SIR and J42137 from the steering shaft assembly.
9. Install the inflatable restraint steering wheel module coil.