Tilt Spring
Tilt Spring Replacement - Steering ColumnRemoval Procedure
Caution: Refer to SIR Caution in Service Precautions.
1. Disable the SIR system.
2. Remove the steering wheel.
3. Remove the knee bolster.
4. Remove the steering column trim covers.
5. Use the tilt lever to tilt the column in the UP position.
6. Remove the tilt spring (1).
Installation Procedure
1. Lubricate tilt spring guide with synthetic grease.
2. Install the tilt spring guide into the tilt spring.
3. Install the tilt spring (1).
4. Install the steering column trim covers.
5. Install the knee bolster.
6. Install the steering wheel.
7. Enable the SIR system.