Tilt Spring - Assemble

Tilt Spring - Assemble - Off Vehicle





1. Lubricate spring guide with synthetic grease. Install the spring guide into the tilt spring.

Caution: The tilt spring and the spring guide are under pressure. The tilt spring and the spring guide may become a projectile. Secure the spring with locking pliers during removal. Secure the spring with locking pliers during installation. Bodily injury may result during removal and installation of the tilt spring and the spring guide. Always use caution during removal and installation of the tilt spring and the spring guide.





2. Install the tilt spring (1).
2.1. Install the tilt spring (1) to the post on the steering column support assembly (2).
2.2. Secure the tilt spring (1).
3. Install the upper and lower trim covers.