Electronic Column Lock Module - Disassemble
Electronic Column Lock Module - Disassemble - Off Vehicle1. Remove the ignition and key alarm switch assembly.
2. Remove the steering column tilt head components.
3. Remove the park lock cable assembly (1) from the electronic lock module assembly in the following way:
3.1. Place the steering column lock cylinder set into the OFF position.
3.2. Place the shift lever clevis into the PARK position.
3.3. Use a small blade to push against the locking tab on the end of the park lock cable assembly (1).
3.4. Disconnect the park lock cable assembly (1) from the electronic lock module assembly.
4. Remove the 3 TORX(R) screws (2) from the electronic lock module assembly (1).
5. Remove the electronic lock module assembly (2) from the steering column tilt head assembly.