Linear Shift
Linear Shift Assembly Replacement - On VehicleRemoval Procedure
Caution: Refer to SIR Caution in Service Precautions.
1. Disable the SIR system.
2. Remove the steering column trim covers.
3. Remove the shift lever from the linear shift assembly.
4. Disconnect the automatic transmission shift lock actuator from the linear shift assembly.
5. Disconnect the transmission shift cable from the linear shift assembly.
6. Disconnect the park lock cable assembly (1).
7. Insert a small screwdriver into the slot on the lock module assembly and push against the park lock cable locking tab to remove the park lock cable.
8. Remove the linear shift assembly retaining screws.
9. Remove the linear shift assembly.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the linear shift assembly and retaining screws.
Tighten the linear shift assembly retaining screws to 10 Nm (89 inch lbs.).
2. Connect the park lock cable assembly (1) to the lock module assembly.
3. Connect the transmission shift the linear shift assembly.
4. Connect the automatic transmission shift lock actuator to the linear shift assembly.
5. Adjust the automatic transmission shift lock.
6. Install the shift lever.
7. Install the steering column trim covers.
8. Enable the SIR system.