Cylinder Pipe/O-Ring Seals Replacement Off Vehicle (Quiet Vlv)

Steering Gear Cylinder Pipe - Assemblies/O-Ring Seals Replacement Off Vehicle (Quiet Valve)

Disassembly Procedure
1. Loosen both cylinder line fittings on the cylinder end of the gear assembly.





2. Loosen both fittings on the cylinder line assemblies (1) at the valve end of the gear assembly.
3. Remove both cylinder line assemblies (1) from the rack and pinion gear assembly (2).





4. Remove-the O-ring scald (1) from the valve end of line.
5. Discard the O-ring seals (1).

Assembly Procedure





1. Inspect the cylinder lines (1) for the following items::
^ Cracks
^ Dents
^ Damage to the threads

2. Replace the parts as needed.





3. Install the new O-ring seats (1) to the valve end of the cylinder lines.

Notice: Refer to fastener Notice in Service Precautions.





4. Install the cylinder line assemblies (1) to the gear assembly (2).
^ Tighten the valve end fittings to 16.9 Nm (12.6 ft. lbs.)
^ Tighten the cylinder end fittings to 27 Nm (20 ft. lbs.)